Swapping Data Objects

When you swap data object, you swap the assignment of data for two grids with each other.
You can also use this function for grids that are not on the same page.

Prerequisite: You have opened a document in the document editor. The document contains either static or dynamic grids. The same category is assigned to the grids. In addition, layouts and data objects are assigned to the grids.

1. Choose the page on which you want to swap the data objects.

2. Open the Data objects tab.

3. In the document preview, click the object handle next to one of the data objects that you want to swap with another.

A menu opens.

4. Choose Swap data object.

5. Open the menu next to the data object that you want to swap with the first data object.

6. Choose Paste data object.

The data objects swap grids.